This product range is used to achieve injection moulding cycle time reduction and improvement of properties in finished parts produced from unreinforced polypropylene.
The addition of Timecut PP will offer you the following advantages:
- 10-40% cycle time reduction (depending on wall thickness)
- Economic with low dosing level of 1-3%
- Ejection temperature of the part is approx 10°C higher as a result of higher crystallisation temperature and therefore cycle times are shorter.
- Higher level of crystallinity and finer crystal structure.
- Increased crystallisation speed.
- Increased temperature stability.
- Increased stiffness (E-modulus) by approx 10%.
- Increased impact strength at low temperatures.
- Improved resistance to creep under pressure.
- Reduction in sink marks.