PLASTIC TECHNOLOGY SERVICE LTD
Tel: +44 (0) 1722 781 088 Email: info@ptsuk.com

 

CONTACT PTS  +44 (0) 1722 781 088 info@ptsuk.com

TIMECUT PP

Cycle time reduction and improvement of properties.

With the Timecut PP product range, the processor of unreinforced PP can achieve a 10-40% cycle time reduction (depending on wall thickness) using a low dosing level of 1-3%.

The addition of Timecut PP will offer you the following advantages:

• Ejection temperature of the part is approx 10^oC higher as a result of higher crystallisation temperature and therefore cycle times are shorter.
  
• Higher level of crystallinity and finer crystal structure.
  
• Increased crystallisation speed.
  
• Increased temperature stability.
  
• Increased stiffness (E-modulus) by approx 10%.
  
• Increased impact strength at low temperatures.
  
• Improved resistance to creep under pressure.
  
• Reduction in sink marks.